239-299-9367

Gutter Installation in Fort Myers, FL | Gutter Contractor & Installation

Trusted Fort Myers Roofing handles gutter installation in Fort Myers, FL, for homes and commercial properties in Pelican Preserve, Paseo and the neighborhoods off Daniels Parkway. We install seamless aluminum gutters, downspouts and leaf guards built to handle Southwest Florida’s heavy summer rain.

The most common problem we see is a 5-inch gutter that simply can’t keep up with a summer downpour, so water spills over the edge, soaks the fascia and pools right next to the foundation. That’s why we usually recommend 6-inch seamless gutters with oversized 3x4 downspouts, which can carry roughly 40% more water than a standard 5-inch system. We roll out each run on site from one continuous piece, pitch it about 1/4 inch every 10 feet toward the downspouts and fasten it with hidden hangers spaced closer together to stand up to storm winds.

Most homes are done in a single day, including removal of the old gutters and any fascia touch-ups. Seamless aluminum gutters typically run about $8 to $15 per linear foot installed, and we’ll give you a free written estimate once we’ve measured your roofline.

Every gutter system we install is backed by our 5-year written workmanship warranty. We’ll walk through the coverage with you before we start, so you know your new gutters are protected well beyond the first storm.


Talk With Our Roofing Experts

Why Choose Trusted Fort Myers Roofing for Expert Roofing Services?


20+ Years of Roofing Experience

Serving Southwest Florida since 2001, Trusted Fort Myers Roofing brings decades of experience to residential roofing projects, including roof installation, repair, and replacement.

BBB Accredited, Licensed, and Insured

Trusted Fort Myers Roofing is BBB-accredited, licensed, and insured. We use quality roofing materials and follow proper installation practices.

Free Roofing Estimates

We provide free roofing estimates so you can review the expected costs, material options, and work involved before replacing your roof.

5-Year Workmanship Warranty

We offer a 5-year written workmanship warranty on qualifying roof replacement work, with coverage subject to the warranty's terms and conditions.

Get a Free Roof Estimate

GAF President's Club Award (2019)

Licensed and Insured

Gutter Installation Projects We've Completed in Fort Myers, FL

  • Rotted Fascia Repair and New Seamless Gutters
  • Tile Roof Valley Gutter and Fascia Corner Rebuild
  • Full Gutter Replacement
Rotted Fascia Repair and New Seamless Gutters

The old gutter on this home had pulled away from the roof edge, and with no drip edge or gutter apron behind it, rainwater had been running straight down the fascia for years until the wood turned black and soft. Trusted Fort Myers Roofing removed the gutter, cut out the rotted fascia and replaced it with new board, then added drip edge and a gutter apron so water lands inside the trough instead of behind it. We finished with a new 6-inch seamless aluminum gutter on hidden hangers, leaving the roofline solid, clean and ready for the next downpour.

Final Cost: $2,450

Turnaround Time: 1 day

Tile Roof Valley Gutter and Fascia Corner Rebuild

Water pouring off this tile roof valley had been overshooting the old gutter for years, and the corner below it had filled with so much debris that a plant was literally growing out of it. The constant overflow split the fascia at the corner and loosened a valley tile, letting water reach the wood behind it. Trusted Fort Myers Roofing cleared everything out, replaced the rotted fascia corner, reset the cracked tile and installed new seamless gutters with a mitered corner, a larger outlet right below the valley and a splash guard to keep fast-moving water inside the trough.

Final Cost: $1,950

Turnaround Time: 1 day

Full Gutter Replacement

This home’s gutters had been packed with leaves and sludge for so long that water sat in the trough and soaked the roof edge, rotting the fascia and the first few inches of decking right above it. Our crew pulled the old gutters, cut back the shingles along the eave and replaced the rotted fascia and decking before installing new drip edge and a gutter apron. From there, we hung a new 6-inch seamless aluminum system with hidden hangers and oversized downspouts, giving the water a clear path off the roof and away from the stucco walls.


Final Cost: $3,850

Turnaround Time: 2 days

Gutter Installation Services in Fort Myers, FL

Residential gutter installation

Residential gutter installation keeps roof runoff from pouring off the edge, protecting fascia boards, landscaping beds and the slab from the heavy summer rain that hits Fort Myers homes almost daily.

Trusted Fort Myers Roofing measures every roof plane, slips a gutter apron behind the trough so water can’t run down the back side, then fastens each run with hidden hangers screwed into the fascia and rafter tails.

Getting the pitch and downspout placement right means water moves off the house fast instead of spilling over the front during a downpour.

Full gutter system replacement

Full gutter system replacement makes sense when old gutters are sagging, leaking at every seam or pulling away from rotted fascia.

We remove the entire system, check the fascia behind it and replace any soft boards before installing new gutters, downspouts and outlets sized for the roof.

Starting fresh fixes the hidden damage along the roofline and gives the home one matched, watertight system instead of a patchwork of old repairs.

Seamless gutter installation

Seamless gutter installation uses aluminum coil formed right in our truck with a portable roll-forming machine, so each run comes out in one continuous piece cut to the exact length of the roofline.

The only joints are at the corners, where we use mitered connections sealed with gutter sealant, and we typically install .027 or .032-gauge aluminum that resists denting from falling branches.

With fewer seams to fail, the system leaks less, stays cleaner and needs far less maintenance over the years.

Sectional gutter installation

Sectional gutter installation works well for small runs, short porch roofs and repairs where only part of a system needs replacing.

Trusted Fort Myers Roofing joins the 10-foot pieces with slip connectors and seals every joint, and sectional systems also open the door to materials like copper half-round that aren’t roll-formed on site.

It’s a practical, budget-friendly option for smaller areas, and careful sealing keeps those joints tight through heavy rain.

Fascia-style gutter installation

Fascia-style gutter installation is popular on many Southwest Florida homes because the gutter doubles as the fascia, giving the roofline a smooth, clean face with no visible hangers.

We mount these larger-profile gutters directly to the rafter tails, often replacing the old fascia board entirely, and use internal brackets that keep the face free of fasteners.

The result is a sleek, modern look that hides the gutter in plain sight while handling large volumes of water.

K-style gutter installation

K-style gutter installation is the most common choice on homes today, with a flat back and decorative front that looks a lot like crown molding.

That shape is more than looks, since a 5-inch K-style gutter can hold more water than a 6-inch half-round gutter, and we pair it with matching 2x3 or 3x4 downspouts based on roof size.

The profile is strong, easy to keep clean and blends nicely with most Florida home styles.


Trusted Fort Myers Roofing

The Best Roofing Contractors in Southwest Florida!

Need a roof repair, replacement, or new installation? We're here to help. Get honest advice, clear pricing, and a free roofing estimate for your home.

239-299-9367

Gutter Installation Frequently Asked Questions

What size downspouts do I need for my roof?

It depends on how much roof drains to each one. A standard 2x3-inch downspout handles about 600 square feet of roof, while a 3x4-inch downspout nearly doubles that to about 1,200 square feet. For Florida downpours, bigger is usually better.

How many downspouts should my gutters have?

As a general rule, one downspout for every 30 to 40 linear feet of gutter. Long runs or large roof sections may need more, so we plan placement based on your actual roofline instead of a fixed number.

What’s the difference between seamless and sectional gutters?

Seamless gutters are formed on site in one continuous piece, while sectional gutters are joined every few feet. Fewer joints means fewer spots to leak and less maintenance over time.

Can gutters be installed on a tile roof?

Yes. Trusted Fort Myers Roofing installs gutters on tile, shingle and metal roofs, adjusting hanger placement and gutter height so water from the tile overhang lands right in the trough instead of shooting past it.

Can I hook a rain barrel to my new gutters?

Yes. In Florida, rain barrels are encouraged and homeowners associations aren’t allowed to prohibit them, though some may set rules on size, color or placement. Just keep a lid or fine mesh on top to keep mosquitoes from breeding.

Are gutters required on every home in Fort Myers?

Not always. Code only requires a controlled roof drainage system where expansive or collapsible soils are present. Even so, gutters protect fascia, landscaping and foundations, so most Florida homeowners are better off with them.